SmartTintLogoWhite
Back to Automotive Packages
Smart Tint® Power Supply H15 w/ Remote Control/Wall Switch/up to 30 sq feet
Smart Tint® Power Supply H15 w/ Remote Control/Wall Switch/up to 30 sq feet - Image 2
Smart Tint® Power Supply H15 w/ Remote Control/Wall Switch/up to 30 sq feet - Image 3
Smart Tint® Power Supply H15 w/ Remote Control/Wall Switch/up to 30 sq feet - Image 4

Flip Tint® & Smart Tint® Includes:

  • 12V DC Power Controller w/ Dimmer Knob & Remote
  • Pre-Wired Film Ready To Install. You just need to trim to fit.

Stealth Tint® Includes:

  • No power or wires required!

Smart Tint® Power Supply H15 w/ Remote Control/Wall Switch/up to 30 sq feet

$223.75

Genuine Smart Tint® Technology

Powers on Clear, Powers off Private and is dimmable.

D-I-Y Installation

All material comes in a rectangle size and requires to be trimmed to fit on-site by a professional installer.

Smart_Tint_Smart_Cling_Self_Adhesive

Smart Cling® Self Adhesive Technology

Peel-n-Stick dry installation only.

Templates Available

You have the option to make a template of the shape you would like us to manufacture. Upon order confirmation a Project Manager will contact you and provide you the information to send the templates as well as answer any questions you may have. Please note, if making templates to accommodate the material wiring to be at least 2" below the window door-sweep. It is recommend to have a professional remove the door panels when installing this technology. Keep in mind if you lose power you cannot see through the material. If you would like the default state with no power of the technology to be clear please look at our Flip Tint® option. It is not recommend to install any type of window films on your front windshield.

Pre-Wired

By default each piece of Smart Tint is pre-wired in the middle of the long side to accommodate for installation. Upon order confirmation, we will send you shop drawings to confirm any custom wire locations or fabrications. We do not pre-manufacture to any specific year, make or model. All orders are considered custom and professional installation is recommended.

Dealer Opportunities Available Only After Your First Successful Order & Installation!

Discuss with the Project Manager that will be contacting you after your order has been submitted.

Description:

Smart Tint Power Supply H-15R with Remote Control/Wall Switch On/Off Only
Includes remote control.


The H-15R power control unit is extremely efficient and
designed for long term permanent installation.

The H-15R is made of fine copper material, and has a very
stable output. This 15W unit controls up to 30 sq. feet
of our Smart Tint® 6th Generation Smart Film material and is constructed of a high-performance flame retardant epoxy resin casting.

The operating temperature is very low and suitable for
various environments.

The H-15R power control unit has a circuit board that utilizes a
self recovery system designed to cut the power by itself when over
loaded.
This system will auto restart when over load or short is
corrected. Includes RF remote and dry contact relay input
compatible with 3rd party control systems such as crestron, lutron,
savant, dmx etc.

Features:

Rated Power: 15W
Rated Ampere: 2A
Input Voltage: AC 110-120 vac
Output voltage: AC 48-60 vac 
Size: 26.9875mm H (1.0625″)  x 76.2mm W (3″) x 125.4125mm L (4.9375″)
Weight 12 lbs
Dimensions 16 × 6 × 6 in
You'll Also Like:
Smart Tint® Power Controllers:
Scroll to Top

Search our ecosystem...